How To Reset The WPS Pin On Your HP Printer

By
Kajal
-
0
233

When you first set up a printer, it’s not that hard to get going. But as time goes on, you might want to reset the pin on your HP Printer so that it can be used with a different device. In this article is a step by step guide on how to reset your pin so that the Wi-Fi will work properly if you have to use the printer somewhere else.

What is the WPS Pin?

If you are having trouble connecting your HP printer to the network, or if you just want to reset the wireless security key (WP pin) on your printer, there is a simple way to do it.

The WP pin is a 12-digit number that is used to secure your wireless connection and protect your printing privileges. You can reset the WP pin by entering the following commands into your HP printer’s management interface:

HPE Printer Management > Configuration > Security > Wireless Settings > Wireless Security Key (WP) > Reset.

How to Reset the WPS Pin on an HP Printer

If you are having trouble connecting to your HP printer over Wi-Fi, there is a chance that the WPs Pin On HP Printer may have been reset. To reset the pin, follow these steps:

  1. Open the HP Printer control panel.
  2. Click the “Network and Sharing Center” icon on the taskbar.
  3. Select the “Wireless and Networks” category.
  4. Under “Wi-Fi,” select your HP printer from the list of devices.
  5. Click the “Advanced Settings” button on the right side of the window.
  6. Under “Wi-Fi Security,” click on the “WPS Settings” tab.
  7. In the “WPS Settings” window, find and click on the “Reset WPS Pin” button.
  8. Click on the “OK” button to confirm your resetting of the WPS pin and return to the HP Printer control panel window.
  9. Reconnect your HP printer to your network and try to connect again using Wi-Fi

How to Reset the WP7 Pin on an HP Printer

If you have an HP printer and are having trouble resetting the Find Wps Pin Hp Printer, here is a step-by-step guide on how to do it.

First, open the printer and remove any paper that is loaded. Next, locate the reset button on the front of the printer. On some models, this button is located on the left side of the printer. Push down on this button until it clicks into place. You will now see a small white light next to the reset button. This light should turn off after pressing the reset button. Now, hold down the reset button again and insert a new 4-digit code into the hole that appears. Once you have entered the code, release the reset button and wait for the printer to finish resetting itself. You can now use your HP printer normally.

Final Thoughts

If you have a HP printer that uses Wi-Fi Protected Setup (WPS), then you may need to reset the WPS pin. This can be done by following these steps:

  1. Open the printer’s control panel.
  2. Under the Printers and Faxes tab, click Wi-Fi.
  3. Click the WPS button.
  4. Enter your router’s WPS PIN in the WPS Push Button Value field, and then click OK.
  5. Click Apply Changes to save your changes.